1940's Willys Jeep CJ2A Front and Rear Axles 5.375 Gears in Cobble Hill, British Columbia for sale

Year
1946
Colour
Richard
Front and Rear Axles from my CJ2a Project for Sale, using bigger and newer axles, so these are surplus.
As far as I can tell, the Rear is a Dana 41, Dana 25 in the Front. Tag on both works out to be 5.375 gearing.
From the outside the axles look fine, no rot just surface rust and dirt. No holes in the tubes or housing.
Front Axle condition:
Ring and Pinion gears look good still.
Gears and Axle shafts spin easily.
Steering part turns good.
One of the Drums is stuck, other one turns.
Rear Axle Condition:
-Ring Gear has some pitting on it, still use-able though.
-Both drums are loose, but left one seems warped, and the right one I managed to break loose barely.
-The holes in the carrier for the ring gear are worn out, the ring gear rotates about 1/32 or so when I wiggle the pinion gear back and forth. Will need a new carrier, or re drill and re tap the existing parts to make them usable again.
Prefer to sell as a package, 150 for the set. 100 for front and 50 for the rear if you want to buy one axle only. Prices are OBO.
Axles are in Shawnigan Lake, on Vancouver Island.
Delivery can be arranged depending on location on the Island, but then the price is firm.
Contact me via email or call/text. Will be at work until 4.30pm during Mon-Fri, prefer texts/emails until then.
2nd + 3rd Pic are Front Diff, 4th and 5th are Rear Diff